A Screen-Free Robot Coding Lesson for Primary School

Children in a classroom watching MatataBot on a coding map during a screen-free lesson

In this first coding lesson, children help MatataBot reach a flag on a map. They choose physical coding blocks, put their instructions in order and watch the robot follow them. If it takes a different route, they can work together to change the program.

This screen-free activity gives teachers an unplugged coding lesson plan with robots for children ages 5–7. It builds on our published beginner flag-reaching lesson, using Coding Set to introduce directions, sequencing and checking a program through a shared classroom task.

An unplugged coding lesson plan with robots for beginners

The aim is for children to choose instructions that take MatataBot from a starting point to a flag, then explain the order they chose. They don't need to read written code or have previous coding experience.

Our Coding Set is recommended for ages 5+. Children program it with physical blocks on a Control Board, and the Command Tower sends the instructions to MatataBot. The coding activity is screen-free, with no app or internet connection needed.

Allow 10 minutes to introduce the equipment and demonstrate the commands, followed by around 30 minutes for children to explore, as outlined in the original lesson. Leave time afterward to discuss what happened and put the blocks away. You can split the activity across two sessions if your class needs a slower introduction.

What to have ready

For this screen-free lesson, gather:

  • A Coding Set with MatataBot, Command Tower and Control Board.
  • The forward, backward, left-turn and right-turn coding blocks.
  • The set's map and flags.
  • A clear, level working surface with room around the map.

Before class, connect the tower to the Control Board, charge the robot and tower, and follow the pairing instructions for your set. Try the activity yourself before introducing it to the children. Keep an adult available to guide setup and help groups take turns. No Artist, Musician or Sensor add-ons are needed for this movement-based task.

Our official Coding Set video shows the physical components, the tower reading a program and MatataBot following a route. It's a useful preparation reference for the teacher; the children can do the lesson itself entirely screen-free.

Help MatataBot reach the flag

Begin with a nearby destination and a small choice of blocks. Children can explore more complicated routes once they understand what a single instruction does.

1. Introduce movement before building a route

Show one command at a time so the class can watch its effect. The basic movements are:

Coding block What MatataBot does
Forward Moves forward 10 cm
Backward Moves backward 10 cm
Turn left Turns 90 degrees to its left
Turn right Turns 90 degrees to its right

A turn changes the direction MatataBot faces; it doesn't move the robot sideways into another square. Stand behind MatataBot as you demonstrate, so children can follow left and right from its point of view.

2. Choose the destination and build the program

Set a starting position and mark a nearby destination with a flag, leaving the robot's path clear. For a simple first attempt, you can choose the next map square directly ahead of MatataBot. That gives children a chance to connect one forward block with one movement before adding a turn.

Ask a child to choose the block, then invite the group to say where the robot will stop. Place the blocks on the Control Board in reading order, from left to right, then top to bottom, with the notches facing down.

Once the group agrees on the program, a child can press the large play button. Let everyone watch the run before moving the robot or changing the blocks.

3. Check the result together

If MatataBot reaches the flag, ask the children to show which blocks made that happen. If it goes elsewhere, you can say, “Let's follow the blocks and see what happened.” Work through the sequence together, checking the robot's starting direction as well as the instructions.

Give children time to suggest a change and try again. Put MatataBot back in the same starting position before comparing attempts. This keeps the screen-free lesson focused on the effect of their instructions.

When the group is ready, choose a destination that needs a turn. Later, invite them to find another way to reach the same flag. The original lesson also extends the task by asking children to avoid other flags on the map.

Screen-free coding with a whole class

Small groups give children room to discuss a route without crowding the board. One child can arrange the blocks, another can check the starting position, and another can run the program. Swap jobs after each attempt so everyone has a turn.

If you have one kit, you can lead the screen-free activity with a small group while classmates plan routes on paper. A paper robot with an arrow showing its front helps children keep track of which way it faces. They can draw instructions, move the counter and check their ideas before using MatataBot. CS Unplugged's Kidbots activities offer further ideas for exploring instructions through group play.

For younger children, begin with a single forward movement and adult support. If you're planning unplugged coding activities for kindergarten, keep the first destination close and introduce turns when the children are ready. Our Tale-Bot Pro, recommended for ages 3+, offers a separate screen-free option using onboard buttons. Follow its own guide for setup and movement; it doesn't use Coding Set's board and blocks.

What to listen for as children work

You can use these three checks during the activity rather than adding a written test:

Look for A useful prompt
The child connects a block with an action. “What will this block make MatataBot do?”
The child follows the order of the program. “Which instruction comes next?”
The child can explain a proposed change. “What would you change to help it reach the flag?”

Note whether each child answers independently or with support. Before moving on to other primary school robotics activities, choose a new target and ask for a fresh prediction. That helps you see whether children can apply the idea beyond a route they've already practiced.

Plan ahead for December lessons and Christmas gifts

If you're gathering Computer Science Education Week activities, this screen-free lesson gives you a starting point to prepare now. You can return to the same equipment in December with a different destination or an obstacle to plan around.

If a child enjoys the classroom activity, parents may be looking for a way to continue during the holidays. A screen-free coding gift can give them something to explore together over Christmas and into the New Year.

For learning at home, Coding Set Home Edition offers three Game Books and 96 guided missions for ages 5+. Parents can choose an activity to follow together without having to plan a lesson. Our guide to starting coding at home explains how to approach a first session, including when the adult is new to coding too.

Early Black Friday: November 9–21

If you're buying a screen-free Christmas gift or preparing equipment for a New Year coding club, our Early Black Friday offer runs November 9–21, 2026:

  • Participating products are 10% off.
  • Orders with two or more eligible products automatically receive an additional 10% off eligible products.

MatataStudio Black Friday gift banner with coding robots and a digital microscope

You can check the Early Black Friday collection for eligible products, availability and current terms. For school purchasing, request a classroom equipment quote to discuss suitable quantities and purchasing options.

Whether you're preparing a class or choosing a gift, a nearby flag is enough for the first screen-free coding challenge. Give children time to build an idea, see what happens and decide what they'd like to try next.

Questions about screen-free robot lessons

My class knows forward and backward but mixes up left and right. Should we wait?

You can start with a straight route using forward and backward commands. Introduce one turn at a time, with children standing behind the robot to share its point of view. They can join the screen-free lesson while they continue practicing directions.

What should I check if the blocks look right but MatataBot misses the flag?

Check the starting position and facing direction first. Then check the block order and orientation, the robot's pairing with the tower, and whether the map lies flat. If you're using a homemade map, our product support guidance specifies 10 × 10 cm squares to match the basic forward and backward movement.

Can I use Coding Set Pro for this lesson?

Yes. Coding Set Pro includes the same core physical programming system used here. You can use its movement blocks for this screen-free flag activity without bringing in the dedicated Artist or Musician components.

Can I teach this with just one Coding Set?

Yes. Run the screen-free activity with a small group while others plan on paper. For a whole class sharing one kit, spread the robot turns across several sessions so each group has time to try its ideas.

Zurück zum Blog

Hinterlasse einen Kommentar

Bitte beachte, dass Kommentare vor der Veröffentlichung freigegeben werden müssen.